Roof Repair – Why It’s Important to Hire a Professional
Your roof is an integral part of your home. They keep out the rain and snow, protect your house from the elements, and help keep you cool in the summer. However, it can also be a source of leaks and other problems if it isn’t well maintained. Repairing a leak can be an affordable way to prevent future damage.
If your shingles deteriorate because of excessive sun exposure, you may need to replace them. UV rays will cause the asphalt coating to peel off over time, which will result in damage to the shingle. A good roofer will be able to repair damaged shingles efficiently. Roofing will also be able to assess the roof for other potential damage and take care of it. Inspect all the shingles around the damaged ones to see if any are curled, pulled up, or missing. This could indicate water leaks.
Then, remove the nails holding the damaged shingle in place. Use a flat bar to separate it from the rest of the shingles in the row above, then spread a thin layer of asphalt roofing cement under it. After the shingles are free, you should be able to remove the damaged shingle and slide a replacement shingle into place. Be sure to re-secure the shingles above with new nails.
Flashings are a critical part of your roof, protecting the edges, valleys, and joints between roofing and obstructions such as chimneys, dormers, vent pipes, and skylights. Unless the flashings are in good condition, your roof could leak and lead to serious water damage.
Flashing repairs are typically easy and inexpensive if you notice damage or wear on the flashings early enough. For instance, if the flashings develop small holes due to corrosion, you can plug them with roofing cement and then patch them up using a piece of the same material as the flashings.
If the damage is more extensive or high winds have damaged the flashings, they will need to be replaced. A skilled roofer can remove the shingles, expose the damaged flashings, and replace them with new ones. They will also be able to determine whether there is additional water damage that needs to be addressed, as well.
When it comes to roof repair, many homeowners hire a professional instead of tackling it themselves. That’s understandable – it can be dangerous to climb up your roof in wet weather and, when you’re dealing with a hot roof, there’s a risk of injury or damage to your home. A damaged vent boot is one of the most common causes of leaks on roofs. These plastic or metal covers protect the area around pipes that protrude from a roof to prevent water from leaking through the roof and infiltrating your home.
A damaged pipe boot is one of the most common causes of roof leaks and, as such, you must catch it right away. Fortunately, there are affordable options available for repairing damaged vent boots. The process is relatively easy and won’t take long at all – it just requires some careful measurements, a little bit of cutting wires, a little silicone adhesive, and a new vent boot. This will help keep your home dry and prevent costly damage from occurring.
Gutters are not exciting or attractive, but they play a key role in directing water away from your home. If they become damaged, it’s important to repair them as soon as possible to avoid further and long-lasting damage deep inside your home. The most common gutter problem is clogging. This happens when twigs, leaves and other debris become stuck in the system.
A sagging gutter can cause water to drain off the top of the roof instead of going toward the downspout. It can also result in sagging gutters. A damaged gutter can also bend outward, especially if it’s been under heavy pressure. It’s a good idea to inspect them regularly and call for repair if necessary.
Gutters can develop holes in various ways, from falling branches to sharp tools. If a hole occurs, make sure it’s patched immediately so the rust doesn’t spread or eat through the metal. Use roofing cement to make a metal-repair patch several inches bigger than the hole for a quick and cheap fix.